Expert Answers about Toyota Land Cruiser
- Surco Safari Cargo Basket and Malone Roof Rack for a 1997 Toyota LandCruiser with Factory Side Rails
- The Surco Safari roof rack will fit to your vehicle and the Malone Roof Rack, part # MPG202. You have a couple of options with mounting the basket.
The Surco Safari rack I recommend for your vehicle is the 50 x 60 variant, part # SPS5060-1101. This includes an additional kit that will mount to your raised factory rails.
This kit includes four clamps that will mount the basket directly to your factory rails that run front to back without actually needing a roof rack. If you're planning...
view full answer... - Can Firestone CoilRite Air Springs Be Used w/ Timbren Helper Springs on 2020 Toyota Land Cruiser
- You could add the Firestone # F4164 Coil-Rite Air Helper Springs to your existing setup, but I don't believe they'd do you a whole lot of good.
When the Timbren # TTORLC2 Aeon springs are installed, you'll have about 1/2 to 1-1/2 inches of preload between the spring and the and the top surface of the axle tube. Once the suspension compresses by that amount to take up the preload, the Timbren springs will come into play. In other words, the only time the # F4164 Coil-Rite springs would...
view full answer... - Do Any of the Jerry Can Holders Fit a 1970 Toyota FJ40 Land Cruiser?
- I confirmed with the MORyde fit guide that the Spare Tire Mounted Jerry Can Holder for Jeep Wrangler - 5 Gallon - Tall Tray # MR99MR will attach to your 1970 Toyota Land Cruiser if the spare tire carrier has at least 3-inch diameter clearance hole centered in the middle of the lugs AND has a lug pattern of 5 x 4.5”, 5 x 5”, or 5 x 5.25”
view full answer... - Ball Mounts w/ Rise for a Van Towing a Trailer w/ a Taller Coupler
- I would be happy to help you. You will need a ball mount with 5-6 inches of rise to lift up the height of your ball mount so it is level with the coupler on your trailer.
If you have a 2" hitch you will want the Curt Ball Mount item # C45446. This ball mount has a 5" rise. You will want to use the 2" hitch ball item # A-90 with this ball mount.
If you have a 1-1/4" hitch you will want the Brophy Drawbar item # BM96. This ball mount has a 5-1/2" rise. You will want to use the 2" Hitch...
view full answer... - Recommended Air Mattress For A 2002 Toyota Land Cruiser
- Since you have the seats pulled from your 2002 Toyota Land Cruiser your best option to fill up as much of that space as possible is the AirBedz XUV Air Mattress # 341031. It's 66" long x 52" wide (43" at the tailgate) x 10" tall. This mattress sleeps 2 adults and has a built-in, battery-powered pump that inflates and deflates the mattress in minutes.
It also comes in blue # 341030 and camo # 341032.
view full answer... - Suspension Enhancement for a 2007 Toyota Land Cruiser Tray Back
- We have a suspension solution for your 2007 Toyota Land Cruiser.
The Replacement Air Spring that you referenced, part # AL50201, is a replacement for the Loadlifter 5000, which is not compatible with your Land Cruiser.
Instead, I recommend the Timbren Suspension Enhancement System. For the rear axle, they have part # TTORSEQ. For the front, they have part # TTOFLC1A.
These are jounce-style springs with a 6000-lb capacity. They work independently and become more rigid with more weight,...
view full answer... - Weight Distribution for 2013 Toyota Land Cruiser
- The Reese Steadi-Flex # RP66559 is indeed surge brake compatible; the bars do allow enough movement within the clamps so the tongue can actuate the brakes. This is why weight distribution systems with brackets are compatible with surge brakes but Reese systems that use chains hangers are not. There is not adequate horizontal movement in those systems to activate surge brake systems.
The Steadi-Flex # RP66559 has a total tongue weight range of between 500 lbs and 1,000 lbs and is likely...
view full answer... - Will Bully Adjustable Ladder Rack Fit a 1986 Toyota Land Cruiser with Rain Gutters
- Yes, you can use the Bully adjustable ladder rack, # CG-903, on your 1986 Toyota Land Cruiser. This vehicle, like you said, has side rain gutters which is what the rack attaches to. We also have a couple of regular roof racks that will also fit. I have included a link to them for you.
view full answer... - 1997 Toyota Land Cruiser Front Off-Road Timbren Bump Stop Kits
- There are two options for installing a set of Off-Road Timbren bump stops at the front of your 1997 Toyota Land Cruiser and the correct option just has to do with what series you have:
- 70 Series # TABSTOFLC1
- 80 Series # TABSTOFLC1A
view full answer... - Are Specific Replacement Sensors Needed for Tuson Tire Pressure Monitoring Systems?
- There is no unique ID necessary when ordering the Replacement Tire Pressure and Temperature Sensor for Tuson Tire Pressure Monitoring Systems # 335TPMS-SENS.
When you get a replacement you will only need to pair the sensor to the receiver like you did when you initially set up the system.
view full answer... - Recommended Bestop Supertop for 1974 Toyota FJ40 Land Cruiser
- The Bestop Supertop Soft Top for Toyota Land Cruiser, part # B5146415 that you referenced, is indeed the correct top for your 1974 Toyota Land Cruiser FJ40. This complete top features 23-ounce black denim fabric, zip-out windows and it includes the bow support system. Doors are not included. The linked video illustrates.
You can use Zipper Cleaner and Lubricant # B1120600 to keep your zippers maintained.
view full answer... - Does the Curt Echo Brake Controller Work with a 2016 Land Cruiser with 7 Way Trailer Connector
- Yes. The Curt Echo Brake Controller # C51180 works with your 2016 Toyota Land Cruiser with a 7 pin connector. The great thing about this brake controller is that it connects via Bluetooth to your Android (4.4 OS or newer) or iPhone (8.0 or newer OS) so that you don't have to worry about installing anything in/under your dash or cabin. The control module itself mounts directly into your 7-way trailer connector, so you are able to use a different vehicle to tow the trailer if needed, as long...
view full answer... - Does 2011 Toyota Land Cruiser Have Trailer Wiring?
- Your 2011 Toyota Land Cruiser may have a tow package and the best way to find this is to simply call your local Toyota dealer with your VIN and ask. If you do not then you can add a 4-way with a universal kit, the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness with Install Kit # 119250KIT.
This installs without splicing wires, but does require the use of a circuit tester. This process is something some people feel comfortable doing themselves while others take it to a local mechanic...
view full answer... - 76 by 49 inch Rhino Rack Pioneer Platform that Fits 2018 Toyota Land Cruiser
- The Rhino Rack Pioneer Platform part # RR45TB is a confirmed fit for your 2018 Toyota Land Cruiser but for the kit that includes all of the mounting hardware to attach to the fixed mounting points on your roof you'd instead want the part # RR89QX.
view full answer... - Can a Weight Distribution System be Used on a Boat Trailer With a Breakaway Tongue
- Unfortunately a weight distribution system cannot be used on a trailer with a breakaway tongue. The breakaway style tongue cannot handle the additional pressure that is applied to the tongue by the weight distribution system when distributing weight and controlling trailer sway.
If you are having trouble with the rear of your 1999 Toyota Land Cruiser sagging when towing your boat trailer, then you may be interested in the Timbren Rear Suspension Enhancement System, # TTORSEQ. I have attached...
view full answer... - Can the Thule Hullavator Be Used with a Malone AirFlow2 Roof Rack
- Yes, the Thule Hullavator Pro Kayak Carrier part # TH898 will work with the Malone AirFlow2 Roof Rack either using the integrated channels or the wrap-around style clamps. However, the Hullavator requires that the crossbars extend at least 4" past the mounting feet so in order to obtain this I recommend you use the 65" long version part # MPG217.
view full answer... - 2016 Toyota Land Cruiser 65 Inch Roof Rack Recommendation
- The Rhino-Rack Vortex crossbars have a limited amount of space on the underside where the legs attach to the crossbars so if you're really wanting this roof rack system on the raised rails of your wife's 2016 Toyota Land Cruiser you need the roof rack with the 54" crossbars:
54" Vortex Aero Crossbars - # RRVA137B-2
SX Series Legs - # RRSX100
To utilize longer 65" crossbars I recommend going with the Malone AirFlow2 Roof Rack # MPG217. This is essentially the same thing just from a different...
view full answer... - Fit of Curt Class III 13091 Trailer Hitch on 1991 Toyota Land Cruiser
- Curt lists the # 13091 as a fit for the 1992-2000 Mitsubishi Montero but not the 1991 Land Cruiser. They do however list the the # C12181 as being a fit for both the Montero and the 1991 Land Cruiser, so obviously the bolt pattern is identical.
Since the C12181 listed as a fit for your vehicle has a 1-1/4 inch receiver tube, my educated guess would be that Curt doesn't list the almost identical # 13091 as a fit for the 1991 Land Cruiser because it must have a lower towing capacity. I'm...
view full answer... - Will the Surco Safari Rack Rooftop Cargo Basket Fit a 2000 Toyota Land Cruiser with Factory Rails
- I checked with Surco and the Safari Rack, # SPS5060-1101, is listed as a fit to the factory side rails on your 2000 Toyota Land Cruiser. This rack is among the largest we offer but is also light weight because it is made of aluminum.
view full answer... - Pioneer Platform Compatibility With Vehicle Rain Gutters
- The Rhino-Rack Roof Rack Legs - Gutter Mount - 4-5/16" Tall - Qty 2 # RL110S2 you asked from simply needs the Leg Spacers for Rhino-Rack Pioneer Platforms and Trays - 3/8" Thick - Qty 2 # RRPLHSPAIR to attach to the Pioneer platform. No crossbars are needed for the gutter mount fit.
There are pioneer platforms in many different sizes, so you will need to determine the best fit for your specific vehicle. There are also different heights of the gutter mount legs but you will use the...
view full answer...
Go To Results